|
390 Horsepower BUDGETChevy 383 -
390 Horsepower
Long Block Assembly
$4,195.00
|
 |
| Part |
Manufacturer |
Description |
| |
|
390 HP - 383 Stroker Motor |
| Block |
DES |
4 Bolt, seasoned core, cleaned, magnafluxed, decked w/BHJ fixture, bored, honed w/BHJ torque plates,
brass freeze plugs and cam bearings installed, left hand dipstick, painted black standard |
| Crank |
DES |
New nodular iron
3.75" stroke, 2 pc. rear seal |
| Pistons |
KB/Silvolite |
Claimer flat top 10.3
compression w/70cc head |
| Rings |
Federal Mogul |
Moly, non-file fit |
| Rods |
DES |
5.7 I-Beam, forged
5140 steel, full floating pin, 190,000 psi ARP cap screws |
| Bearings |
Clevite |
Cam, rod and main bearings |
| Heads |
Edelbrock Performer |
23 degree aluminum, straight plug,
70cc, 2.02 and 1.60 stainless valves, 7 degree retainers and keepers, CNC
profiled combustion chamber, up to .575" lift, 1.450" springs, completely
assembled heads |
| Rocker Arms |
DES |
Aluminum, roller tip, 1.5 ratio, 3/8" stud |
| Pushrods |
Pioneer |
High performance, hardened, chromemoly, 5/16" |
| Cam & Lifters |
Lunati/Melling |
Hydraulic flat
tappet lift 507/477, Dur. @ .050" 225/235, ADV.
Dur. 285/275 |
| Bolts |
Pioneer |
High performance head and main bolts.
All new engine bolts used. |
| Timing Chain |
Melling |
Double roller, 3 way crank sprocket |
| Timing Cover |
Transdapt |
Chrome, stamped steel |
| Gaskets |
Felpro/Detroit |
High performance, mixed set, one piece oil pan gasket |
| Oil Pan |
Milodon |
Stock style, 7 1/2" deep sump, 5 quarts + filter capacity, gold finish |
| Oil Pump |
Melling |
High Volume |
| Pump Drive |
Melling |
Heavy duty with steel bushing |
| Pump Pickup |
Melling |
Standard screen, welded to pump |
| Dampner |
DES |
OEM style, 400, external balance |
| Flexplate |
DES |
SFI approved, 400, external balance, 168 teeth, 14.13" diameter |
| Balance |
|
High performance
street/strip, piston and rods matched +- 1 gram |
|
Motor completely assembled. |
| All motors require 50% deposit to begin building and balance paid prior to shipping. All motors are shipped
in continental USA excluding Alaska for $250.00 additional. Warranty is provided by manufacturer if a warranty exists. These motors are
custom built for each customer and are considered race only, non-emissions compliant, and customer assumes all liability while operating. |
|
