|
485 Horsepower PUMP GAS SPECIALChevy 383 - 485 Horsepower
Long Block
Assembly
$5,520.00
|
 |
| Part |
Manufacturer |
Description |
| DES383C |
|
485 HP - 383 Stroker Motor |
| Block |
DES 350
1 pc roller block |
4 Bolt, seasoned core, cleaned, magnafluxed, decked w/BHJ fixture, bored, honed w/BHJ torque plates,
brass freeze plugs and cam bearings installed,
right hand dipstick, painted black standard or
Chevy orange available |
| Crank |
SCAT |
New, cast steel 9000 series, 3.75" stroke,
1 pc. rear seal |
| Pistons |
Keith Black |
Hypereutectic, .100 dome, 10.4 compression
w/74cc AFR head |
| Rings |
Speed Pro |
Moly, non-file fit |
| Rods |
SCAT |
5.7 I-Beam, forged 4340 steel, full floating pin, 187,000 psi
3/8 cap screws |
| Bearings |
Clevite 77 |
Cam, rod and main bearings |
| Heads |
AFR |
195cc Race Head,
aluminum, straight plug, standard exhaust
pattern, 74cc, 2.02 and 1.60 valves, 10 degree
retainers and keepers, CNC ported combustion
chamber, intake and exhaust ports, up to .670"
lift, roller springs, complete heads |
| Rocker Arms |
Scorpion |
Aluminum,
full roller 1.5 ratio, 3/8" stud |
| Pushrods |
Trick Flow |
High performance, hardened, chromemoly, 5/16"
one piece |
| Cam & Lifters |
Custom
Roller/ Rhodes |
Hydraulic
roller,
.525"/.540"
lift, int. 242 deg., exh.
252 deg., anti pump-up hydraulic roller lifters |
| Bolts |
ARP |
High performance head and main bolts |
| Timing Chain |
Cloyes |
Heavy
duty 1/2" single roller |
| Timing Cover |
Milodon |
Gold stamped steel
to match pan |
| Gaskets |
Felpro/Corteco |
High performance, mixed set, one piece oil pan gasket |
| Oil Pan |
Milodon |
Stock style, 7 1/2" deep sump, 5 quarts + filter capacity, gold finish |
| Oil Pump |
Melling |
High Volume M55HV |
| Pump Drive |
Melling |
Heavy duty with steel bushing |
| Pump Pickup |
Melling |
Standard screen, welded to pump |
| Damper |
Pioneer |
OEM style, 400, external balance |
| Flexplate |
Scat |
SFI approved, 400, external balance, 168 teeth, 14.13" diameter |
| Balance |
DES in-house |
High performance
street/strip, piston and rods matched +- 1 gram |
|
Motor completely assembled. |
| All motors require 50% deposit to begin building and balance paid prior to shipping. All motors are shipped
in continental USA excluding Alaska for $250.00 additional. Warranty is provided by manufacturer if a warranty exists. These motors are
custom built for each customer and are considered race only, non-emissions compliant, and customer assumes all liability while operating. |
|
