| Part |
Manufacturer |
Description |
| Block |
DES |
4 Bolt,
seasoned core, cleaned, magnafluxed, decked w/BHJ
fixture, bored, honed w/BHJ torque plates, brass
freeze plugs and cam bearings installed, right
hand dipstick, one piece rear seal, painted
black standard. |
| Crank |
Scat |
New
cast steel 9000 series 3.75" stroke, 1 pc. rear seal |
| Pistons |
Keith
Black |
Hypereutectic 10.3:1 compression with 58cc head |
| Rings |
Speed
Pro |
Moly, file fit |
| Rods |
Scat |
5.700 I-Beam, forged
4340 steel, ARP rod bolts, .927 pin |
| Bearings |
Clevite
77 |
Cam, rod and main bearings |
| Heads |
AFR |
180cc
street heads, available in angle plug version.
They feature a 56cc - 74cc combustion chamber
with a 64cc exhaust port with a 3/4" head deck.
2.02 intake and 1.600 exhaust valves. |
| Rocker
Arms |
Comp
Cams |
Pro
magnum self aligning chromemoly steel. |
|
Pushrods |
Trick
Flow |
5/16
chromemoly, hardened 1 pc. custom length. |
| Cam & Lifters |
Lunati/Rhodes |
Hydraulic
roller cam and anti pump-up lifters. Lift and duration
selected to your specs. |
| Bolts |
ARP |
High performance main bolts.
All new engine bolts |
| Timing Chain |
Cloyes |
True roller,
heavy duty 3 way crank sprocket |
| Gaskets |
Felpro/Corteco |
High performance, mixed set, one piece oil pan gasket |
| Oil Pan |
Milodon |
Stock style, 7 1/2" deep sump, 5 quarts,
gold finish |
| Oil Pump |
Melling |
M155HV High Volume |
| Pump Drive |
Melling |
Heavy duty with steel bushing |
| Pump Pickup |
Milodon |
Standard screen, welded to pump |
| Dampner |
Pioneer |
OEM style,
350, internal balance |
| Flexplate |
Scat |
SFI
approved 168 teeth, 14.13" diameter |
| Balance
Job |
DES
done in house |
High performance
street/strip, piston and rods matched +- 1 gram |
Available
Upgrade Options:
Crank:
Scat 4340
nitride 3.75" stroke, 1 pc rear seal
ADD $398.00
Rods:
Scat 4340
steel 5.7" H-beam rods
ADD $180.00
Pistons:
SRP forged,
10.4:1cr w/58cc head*
ADD $230.00
* Note:
The combustion
chamber size of your heads will determine your
compression.
Please advise upon order, your chamber size and
preferred compression. Pistons will be selected
accordingly.
|
|
Long Block
completely assembled. All parts available separately |
| All motors require 50% deposit to begin building and balance paid prior to shipping. All motors are shipped
in continental USA excluding Alaska for $250.00 additional. Warranty is provided by manufacturer if a warranty exists. These motors are
custom built for each customer and are considered race only, non-emissions compliant, and customer assumes all liability while operating. |
